Paver Sealing Portland, OR
Portland’s Trusted Paver Sealing Service
- 100% Satisfaction Guarantee
- Licensed & Fully Insured
- State of The Art Equipment
- Safe & Effective Stain Removal
Keep Your Portland Hardscape Looking Its Best with Professional Paver Sealing
Portland’s wet winters and drizzly springs take a toll on exterior hardscapes. Moisture seeps into paver joints, algae spreads across surfaces, and UV exposure fades color year after year. Paver patios, brick walkways, aggregate concrete, and natural stone all face these same challenges. Without protection, what once looked clean starts looking worn and neglected.
4 Seasons Softwash provides professional paver sealing for Portland homeowners who want to protect and restore their hardscapes. This is a full-service process, not just a quick sealer spray. We pressure wash the entire surface first, remove stains, allow a full drying day, offer re-sanding when needed, tape or tarp off adjacent areas, and apply two coats of sealer the same day. Preparation is the difference between a finish that holds up and one that fails early.
The results include a restored appearance, improved surface protection, and a finished look, all of which you can choose based on your preference. Finish options include clear, semi-gloss, and high-gloss. If the joints between your pavers have lost their sand, we offer poly-sanding or traditional paver sanding before sealing. We set honest expectations on how long the finish will last. Call 4 Seasons Softwash at (971) 434-7355 to request a quote.
Paver Sealing Pricing in Portland: What Affects Cost?
How We Price Paver Sealing Jobs
Paver sealing pricing depends on your project. Two main factors shape your quote: square footage and the type of sealant or finish you want.
Our paver sealing jobs start at around $500. Larger projects can reach $5,000 or more depending on scope.
Square footage is one of the biggest cost drivers. Larger hardscape areas require more cleaning, drying management, masking, material, and labor. Finish choice affects pricing too. Clear sealant is one price point. Semi-gloss or high-gloss finishes carry different costs because the products and applications differ. Prep needs also influence the quote since every job includes pressure washing, and some surfaces need re-sanding before the sealer goes on.
Current Promotions and Add-On Options
We offer add-ons that improve results when the surface needs them:
- Poly-sanding: A durable polymeric sand that hardens in the joints and resists washout
- Traditional paver sanding: Standard joint sand replacement for pavers that have lost their fill
Both options are offered before sealing when needed. These are part of proper preparation, not cosmetic upsells. They restore the joint structure so the sealer has a stable surface to bond with.
What Surfaces Can 4 Seasons Softwash Seal?
Paver patios are a core surface we seal. The workflow: pressure-wash the entire surface, remove stains, allow a full drying day, offer re-sanding if joints need restoration, tape or tarp surrounding areas, then apply two coats the same day.
Finish options include clear sealant for a natural appearance, semi-gloss for a subtle sheen, and high-gloss for a wet, polished look. We also offer water-based, “solid-based,” wet-look, and natural finish categories. Pavers must be fully dry before sealing. We need conditions to be about 65 degrees or warmer.
Brick is another hardscape surface we seal. The same prep-and-seal process applies: pressure washing, stain removal, a full drying day, optional re-sanding, area protection, and a two-coat application.
We inspect for visible issues before sealing, such as cracks or uneven areas, but we do not perform repairs or re-leveling. If your brick has structural problems, we’ll let you know what we see. Adjacent areas are tarped or taped off during preparation.
Aggregate concrete falls under our broader hardscape sealing offering. The same prep-first approach applies: pressure washing, stain removal, a full drying period, optional re-sanding when needed, area protection, and two-coat application.
If you want a more natural look, a clear or natural finish works well. If you want something with more depth and sheen, a wet-look or gloss finish brings out the aggregate texture.
Natural stone is included in the surfaces we seal. The same operational requirements apply: full cleaning before sealing, a full drying day, optional re-sanding when needed, tarping or taping off surrounding areas, and two coats applied the same day.
Eco-friendly sealers are available. Our preferred product is Sherbond SB 4000, which has received the best customer feedback and produced the longest-lasting results over the last five years.
Why Portland Property Owners Choose 4 Seasons Softwash for Paver Sealing
Full Surface Prep Before Any Sealer Goes On
We do more than apply sealer. We pressure-wash the entire surface first, remove stains, let the area dry completely, offer resanding if needed, and protect surrounding areas. Prep work is the foundation. Without it, the sealer traps in dirt, bonds poorly, and fails early.
Two-Coat Application for Better Durability
We apply about two coats in a single day for the best results and durability. Two coats provide better coverage, greater wear resistance, and a more consistent finish.
Proven Product Selection Backed by Five Years of Results
We prefer Sherbond SB 4000 because it has had the most success over the past 5 years, received the best customer feedback, and lasts the longest. Customers have reported it lasting up to three years.
Finish Options That Match the Look You Want
Choose a clear sealant for a natural look, a semi-gloss for a subtle sheen, or a high-gloss for a wet, polished finish. Your desired finish is one of the biggest variables in how we quote the job.
Honest Guidance on Lifespan and Maintenance
We set realistic expectations. Expect about a year of performance. In real-world results, some surfaces last up to three years. Reseal when you notice fading.
Clear Scope Boundaries on What We Do and Don't Do
We inspect for visible issues such as cracks or uneven pavers before sealing, but we do not perform repairs or re-leveling.
Eco-Friendly Options and Protective Jobsite Practices
Eco-friendly sealers are available. We tarp off or tape off areas as needed to protect nearby surfaces during the process.
Experience and Satisfaction-Focused Service
4 Seasons Softwash brings a combined team experience of over 20 years. We focus on customer service, experience, and reliability. We back our work with a satisfaction guarantee and take on difficult jobs others turn down.
Get Expert Paver Sealing from Portland's Detail-Focused Team
How 4 Seasons Softwash Completes Your Paver Sealing Project
Evaluate Your Surface and Discuss Finish Options
The process begins with evaluating your project. We look at surface condition, measure square footage, and talk through your goals. We inspect for issues like cracks or uneven pavers but do not repair or re-level them. Finish discussions cover clear, semi-gloss, high-gloss, water-based, “solid-based,” wet-look, and natural finish options.
Pressure Wash the Surface and Remove Stains
We pressure-wash the entire surface before sealing and remove stains before any product is applied. This makes sure the sealer doesn’t lock in dirt, discoloration, or contamination. Cleaning is part of the service, not an optional add-on.
Let the Surface Dry Completely for a Full Day
After cleaning, the area must dry fully for a full day before sealing. Applying sealer to a damp surface leads to adhesion problems, cloudiness, and premature failure. We need conditions to be about 65 degrees or warmer.
Re-Sand Joints if Needed and Protect Surrounding Areas
Before applying the sealant, we offer re-sanding when needed: poly-sanding (a durable polymeric sand that hardens in the joints) or traditional paver sanding (standard joint sand for basic restoration). We also tape off or tarp off areas that need protection before the sealer goes on.
Apply the Sealer in Two Coats the Same Day
Once the surface is clean, dry, and properly prepped, we apply the sealer. We apply about two coats in a single day for the best results and durability. Our preferred product is Sherbond SB 4000, and we offer eco-friendly options. Service time typically ranges from two to six hours.
Share Aftercare Instructions to Protect the Finish
Customers should stay off the sealed area for 24 to 48 hours. For ongoing maintenance, do not pressure-wash sealed areas; soft washing is recommended instead. Annual soft washing is the recommended maintenance path, and reseal when you notice the finish starting to fade.
Satisfaction-Backed Paver Sealing with Honest Expectations
No formal paver sealing warranty is offered. What we do offer is a satisfaction guarantee. We distinguish between a satisfaction guarantee and a written long-term warranty because they’re different commitments.
A sealer’s performance depends on variables we can’t fully control: weather exposure, foot traffic, maintenance habits, and surface condition. Rather than overpromising, we support customer confidence by setting realistic expectations on maintenance and lifespan. Customer concerns are treated as a priority.
Frequently Asked Questions About Paver Sealing
How much does paver sealing cost?
Jobs start at around $500. Larger projects can reach $5,000 or more. We price by square footage and sealant type.
What surfaces do you seal?
We seal paver patios, bricks, aggregate concrete, and natural stone.
Do you clean the surface before sealing?
Yes, we pressure wash the full surface before applying the sealer.
Do you offer sanding before sealing?
Yes, we offer poly-sanding and traditional paver sanding when the surface needs it.
How many coats of sealer do you apply?
We apply about two coats on the same day for better durability.
Does the surface need to dry before sealing?
Yes, we allow a full day for drying after concrete cleaning.
How long do I need to stay off the sealed area?
We recommend 24 to 48 hours.
How long does paver sealer last?
Expect about a year. Some surfaces last up to three years, depending on conditions.
When should pavers be resealed?
Reseal when you notice the finish starting to fade.
What kind of sealer do you use?
We offer water-based, “solid-based,” wet-look, and natural finish options. We commonly use Sherbond SB 4000.
Do you offer a warranty on paver sealing?
No formal warranty. We offer a satisfaction guarantee.
Do you inspect for damaged pavers before sealing?
Yes, we inspect for visible issues like cracks or uneven pavers.
Do you repair or re-level pavers?
No, structural corrections are outside our scope.
Are there weather conditions that affect paver sealing?
Yes, we need about 65 degrees or warmer.
How do you protect nearby areas during the job?
We tarp off or tape off areas that need protection.
How should sealed pavers be maintained afterward?
Avoid pressure washing. Have them soft-washed annually.
Get a Free Paver Sealing Quote in Portland Today
Your paver patio, brick walkway, or natural stone surface is exposed to Portland’s weather every day. Moisture, staining, and UV fading don’t take breaks.
4 Seasons Softwash provides full prep, optional re-sanding, finish options to match your goals, two-coat application for durability, realistic guidance on lifespan, and aftercare recommendations. Our combined team experience of over 20 years means we know how to handle a wide range of properties and conditions. We back our work with a satisfaction guarantee.
Call (971) 434-7355 to request your free paver sealing quote.
